Eurotec drawings

Product description Paneltwistec wood screws are used as fasteners for load-bearing timber structures between components made of solid timber, glued laminated   timber, cross laminated timber and veneer laminated timber, as well as similar wood-based materials, board-shaped wood-based materials or steel-timber connections. Paneltwistec wood screws can generally be screwed in without   any need for pre-drilling. The exception to this rule is when they are used in   deciduous wood / hardwood. The scraping groove on the screw tip ensures that the screws “grip” quickly, even   in OSBs, for example. The cutting ribs downstream of the thread keep the shaft clear, so even long screws can be inserted with ease. The special screw geometry reduces the splitting effect when screwing in. Paneltwistec wood screws come in countersunk head and flange button head variants, and in coated carbon steel and a variety of stainless steels. Material Hardened carbon steel, blue / yellow electrogalvanized. • Can be used in service classes 1 and 2 according to DIN EN 1995 (Eurocode 5) • Not suitable for wood containing tannins 

Hardened stainless steel (martensitic stainless steel 1.4006 (C1)) © by E.u.r.o.Tec GmbH · Last updated 03/2025 · Subject to changes, additions, typesetting and printing errors • Stainless steel according to DIN EN 10088 • Acid-resistant to a limited extent • 20 years of experience without corrosion problems in suitable woods • High strength → 50% higher breaking strength than A2 and A4 austentic stainless steel → Hardened due to heat treatment • Magnetisable • Can be used in service classes 1, 2 and 3 according to DIN EN 1995 (Eurocode 5) • Not suitable for woods containing a large amount of tannins such as cumarú, oak, merbau, robinia, etc. • Not suitable for salty atmospheres • Not suitable for chlorinated atmospheres